Ford 2005 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 225)

• 4.0L V6 engine

Check the power steering fluid. Refer to the scheduled maintenance

guide for the service interval schedules. If adding fluid is necessary, use

only MERCON威 ATF.

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be

near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

4. If your vehicle is equipped with a 3.0L V6 engine, check the fluid

level on the dipstick. It should be within the FULL HOT range. Do not

add fluid if the level is within this range.

5. If your vehicle is equipped with a 4.0L SOHC V6 or 2.3L I4

engine, check the fluid level in the reservoir. It should be between the

MIN and MAX lines. Do not add fluid if the level is within this range.

6. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the FULL HOT range. Be sure to put the

dipstick back in the reservoir.

2005 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

225

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.2 Manuel d'utilisateur Page 225