Ford 2005 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 151)

• 4x4 LOW – Momentarily

illuminates when the vehicle is

started. Illuminates when 4L

(4WD Low) is engaged.

Using the electronic shift 4WD system

2WD (2WD High) - Power to the rear wheels only; used for street and

highway driving.

4X4 HIGH (4WD High) - Used for extra traction such as in snow or icy

roads or in off-road situations. Not intended for use on dry pavement.

4X4 LOW (4WD Low) - Uses extra gearing to provide maximum power

to all four wheels. Intended only for off-road applications such as deep

sand, steep grades or pulling heavy objects. 4L (4WD Low) will not

engage while the vehicle is moving; this is normal and should be no

reason for concern. Refer to Shifting to/from 4L (4WD Low) for proper

operation.

Shifting between 2WD (2WD High) and 4X4 HIGH (4WD High)

• Move the 4WD control between 2WD and 4X4 HIGH at a stop or any

forward speed up to 55 mph (88 km/h).

Note: Do not perform this operation if the rear wheels are slipping.

Shifting to/from 4X4 LOW (4WD Low)

Note: Some noise may be heard as the 4WD system shifts or engages.

This is normal and should be no reason for concern.

1. Bring the vehicle to a complete stop

2. Depress the brake

3. On vehicles equipped with an automatic transmission, place the

transmission in N (Neutral); on vehicles equipped with a manual

transmission, depress the clutch.

4x4

LOW

4X4

HIGH

2WD

4X4

LOW

2005 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

151

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.2 Manuel d'utilisateur Page 151