Ford 2005 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 85)

The front passenger sensing system can automatically turn off the

passenger front airbag. The system is designed to help protect small

(child size) occupants from airbag deployments when they are

improperly seated or restrained in the front passenger seat contrary to

proper child-seating or restraint usage recommendations. Even with this

technology, parents are STRONGLY encouraged to always properly

restrain children in the rear seat. The sensor also turns off the passenger

front airbag and side airbag (if equipped) when the passenger seat is

empty to prevent unnecessary replacement of airbag(s) after a collision.

When the front passenger seat is occupied and the sensing system has

turned off the passenger’s frontal airbag, the “pass airbag off” indicator

will light and stay lit to remind you that the front passenger frontal

airbag is off. See Front passenger sensing system in the airbags section

of this chapter.

Front safety belt usage sensors

The front safety belt usage sensors detect whether or not the driver and

front outboard passenger safety belts are fastened. This information

allows your Personal Safety System娂 to tailor the airbag deployment and

safety belt pretensioner activation depending upon safety belt usage.

Refer to Safety Belt section in this chapter.

Front safety belt pretensioners

The safety belt pretensioners are designed to tighten the safety belts

firmly against the occupant’s body during a collision. This maximizes the

effectiveness of the safety belts and helps properly position the occupant

relative to the airbag to improve protection. The safety belt

pretensioners can be either activated alone or, if the collision is of

sufficient severity, together with the airbags.

Front safety belt energy management retractors

The front safety belt energy management retractors allow webbing to be

pulled out of the retractor in a gradual and controlled manner in

response to the occupant’s forward momentum. This helps reduce the

risk of force-related injuries to the occupant’s chest by limiting the load

on the occupant. Refer to Safety Belt section in this chapter.

Determining if the Personal Safety System姟 is operational

The Personal Safety System娂 uses a warning light in the instrument

cluster or a back-up tone to indicate the condition of the system. Refer

to the Warning Light section in the Instrument Cluster chapter.

Routine maintenance of the Personal Safety System娂 is not required.

2005 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 247 248

Pas de commentaire

Ford 2005 Mustang v.2 Manuel d'utilisateur Page 85