Ford 2005 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 30)

6. Fan speed adjustment: Controls the volume of air circulated in the

vehicle.

Operating tips

• To reduce fog build up on the windshield during humid weather, place

the air flow selector in the

(defrost) position.

• To reduce humidity build up inside the vehicle, do not drive with the

airflow selector in the O (OFF) position or with recirculated air

engaged.

• Do not put objects under the front seats that will interfere with the

airflow to the back seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

• To improve the A/C cool down, drive with the windows slightly open

for 2-3 minutes after start up or until the vehicle has been “aired out.”

For maximum cooling performance in MAX A/C mode:

1. Move temperature control to the coolest setting.

2. Set the fan to the highest speed initially, then adjust to maintain

comfort.

For maximum cooling performance in panel or panel/floor modes:

1. Move temperature control to the coolest setting.

2. Select A/C and recirculated air (

) to provide colder airflow.

3. Set the fan to the highest speed initially, then adjust to maintain

comfort.

To aid in side window defogging/demisting in cold weather:

1. Select

2. Select A/C.

3. Adjust the temperature control to maintain comfort.

4. Set the fan speed to the highest setting.

5. Direct the outer instrument panel vents towards the side windows.

6. To increase airflow to the outer instrument panel vents, close the

vents located in the middle of the instrument panel.

Do not place objects on top of the instrument panel as these

objects may become projectiles in a collision or sudden stop.

2005 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Climate Controls

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 247 248

Pas de commentaire

Ford 2005 Mustang v.2 Manuel d'utilisateur Page 30