Ford 2005 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 273)

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete.

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid.

Refer to the scheduled maintenance

guide for the service interval

schedules. If adding fluid is

necessary, use only MERCON威 ATF.

Check the fluid level when it is at ambient temperature, 20°–80° F(-7°

– 25° C):

1. Check the fluid level on the dipstick. It should be between the arrows in

the FULL COLD range. Do not add fluid if the level is within this range.

2. If the fluid level is low. Add fluid to bring fluid level up to be between

the arrows in the FULL COLD range.

3. Start the engine.

4. While the engine idles, turn the steering wheel left and right several times.

5. Turn the engine off.

6. Recheck the fluid level on the dipstick. Do not add fluid if the level is

between the arrows in the FULL COLD range.

7. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the FULL COLD range. Be sure to put the

dipstick back in the reservoir.

2005 F250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA_English (fus)

Maintenance and Specifications

273

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 311 312

Pas de commentaire

Ford 2005 F-550 v.2 Manuel d'utilisateur Page 273