Ford 2005 Explorer v.3 Manuel d'utilisateur télécharger pdf (Page 242)

4. Make the final connection of the negative (-) cable to an exposed

metal part of the stalled vehicle’s engine, away from the battery and the

carburetor/fuel injection system. Do not use fuel lines, engine rocker

covers or the intake manifold as grounding points.

Do not connect the end of the second cable to the negative (-)

terminal of the battery to be jumped. A spark may cause an

explosion of the gases that surround the battery.

5. Ensure that the cables are clear of fan blades, belts, moving parts of

both engines, or any fuel delivery system parts.

Jump starting

1. Start the engine of the booster vehicle and run the engine at

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were

connected.

1. Remove the jumper cable from the ground metal surface.

–

2005 Explorer (exp)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

242

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 311 312

Pas de commentaire

Ford 2005 Explorer v.3 Manuel d'utilisateur Page 242