Ford 2004 Ranger v.3 Manuel d'utilisateur télécharger pdf (Page 41)

Replacing headlamp bulbs

To remove the headlamp bulb:

1. Make sure the headlamp switch is

in the OFF position, then open the

hood.

2. Remove two screws and cover (if

equipped).

3. At the back of the headlamp, pry

up the two retainer pins to release

the headlamp assembly from the

vehicle and pull headlamp forward.

4. Disconnect the electrical

connector from the bulb by pulling

rearward.

5. Remove the bulb retaining ring by

rotating it counterclockwise and

slide the ring off the plastic base.

6. Remove the old bulb by pulling it

straight out of the lamp.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

Install the new bulb(s) in reverse order.

2004 Ranger (ran)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 247 248

Pas de commentaire

Ford 2004 Ranger v.3 Manuel d'utilisateur Page 41