Ford 2004 Freestar v.2 Manuel d'utilisateur télécharger pdf (Page 237)

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until three clicks are heard or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level indicator and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil.

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). To protect your engine’s warranty use

Motorcraft SAE 5W-20 or an equivalent 5W-20 oil meeting Ford

specification WSS-M2C153–H. SAE 5W-20 oil provides optimum fuel

economy and durability performance meeting all requirements for

your vehicle’s engine.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Change your engine oil according to the appropriate schedule listed in

the scheduled maintenance guide.

Ford production and aftermarket (Motorcraft) oil filters are designed for

added engine protection and long life. If a replacement oil filter is used

that does not meet Ford material and design specifications, start-up

engine noises or knock may be experienced.

Maintenance and Specifications

236

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 288 289

Pas de commentaire

Ford 2004 Freestar v.2 Manuel d'utilisateur Page 237