Ford 2003 Mustang v.1 Manuel d'utilisateur télécharger pdf (Page 230)

You can check the fluid without driving if the

ambient temperature is above 10°C (50°F). However,

if fluid is added at this time, an overfill condition

could result when the vehicle reaches normal

operating temperature.

The transmission fluid

should be in this range

if at normal operating

temperature (66°C-77°C [150°F-170°F]).

The transmission fluid

should be in this range

if at ambient

temperature (10°C-35°C[50°F-95°F]).

High fluid level

Fluid levels above the

safe range may result

in transmission failure.

An overfill condition of transmission fluid may cause

shift and/or engagement concerns and/or possible

damage.

High fluid levels can be caused by an overheating

condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type

is used. The type of fluid used is normally indicated

on the dipstick and also in the Lubricant

specifications section in this chapter.

Use of a non-approved automatic transmission

fluid may cause internal transmission

component damage.

If necessary, add fluid in 250 ml (1/2 pint)

increments through the filler tube until the level is

correct.

If an overfill occurs,

excess fluid should be

removed by a qualified

technician.

Maintenance and Specifications

230

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 255 256

Pas de commentaire

Ford 2003 Mustang v.1 Manuel d'utilisateur Page 230