Ford 2001 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 138)

If your vehicle is equipped with 4WD, a spare tire of a different

size than the road tires should not be used. Such a tire could

result in damage to driveline components and make the vehicle

difficult to control.

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following

locations:

Tool Location

Spare tire Under the vehicle, just forward of the rear

bumper

Jack, lug nut wrench In the passenger side rear storage

compartment

Jack handle On top of the radiator support at the front of

the engine compartment

Removing the spare tire

1. If equipped with a two piece lug wrench, assemble the lug wrench as

shown in the illustration.

• To assemble, screw the parts

together. To disassemble,

unscrew.

2. Insert the jack handle into the

rear bumper opening.

The handle will stop moving and

forward resistance to turning will be

felt when properly engaged.

3. Turn the handle counterclockwise

until tire is lowered to the ground,

the tire can be slid rearward and the

cable is slightly slack.

4. Remove the retainer from the spare tire.

Roadside emergencies

138

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 223 224

Pas de commentaire

Ford 2001 F-150 v.1 Manuel d'utilisateur Page 138