Ford 2001 Explorer Sport Trac Manuel d'utilisateur télécharger pdf (Page 87)

Replacing lost transmitters

If a remote transmitter has been lost

and you would like to remove it

from the vehicle’s memory, or you

would like to purchase additional

remote transmitters and have them

programmed to your vehicle:

• Take all your vehicle’s

transmitters to your dealer for

programming, or

• Perform the programming

procedure yourself

Programming remote transmitters

It is necessary to have all (maximum of four — original and/or new) of

your remote transmitters available prior to beginning this procedure.

To program the transmitters yourself:

• Place the key in the ignition and

turn from 2 (LOCK) to 3 (OFF)

and cycle between 3 (OFF) and

4(ON) eight times in rapid

succession (within 10 seconds)

with the eighth turn ending in the

4 (ON) position. The doors will

lock/unlock to confirm that

programming mode has been

entered.

• Within 20 seconds, program a

remote transmitter by pressing any button on a transmitter. The doors

will lock/unlock to confirm that the remote transmitter has been

programmed. (If more than 20 seconds pass before pressing a remote

transmitter button, the programming mode will exit and the procedure

will have to be repeated.)

• Repeat the previous step to program additional remote transmitters.

The doors will lock/unlock to confirm that each remote transmitter has

been programmed.

• When you have completed programming the remote transmitters, turn

the ignition to 3 (OFF). Again the doors will lock/unlock to confirm

programming has been completed.

Controls and features

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 263 264

Pas de commentaire

Ford 2001 Explorer Sport Trac Manuel d'utilisateur Page 87