Ford 2000 Excursion v.1 Manuel d'utilisateur télécharger pdf (Page 154)

Do not connect the end of the second cable to the negative (-)

terminal of the battery to be jumped. A spark may cause an

explosion of the gases that surround the battery.

5. Ensure that the cables are clear of fan blades, belts, moving parts of

both engines, or any fuel delivery system parts.

Jump starting

1. Start the engine of the booster vehicle and run the engine at

moderately increased speed.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been started, run both engines for an

additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were

connected.

1. Remove the jumper cable from the ground metal surface.

–

Roadside emergencies

154

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 231 232

Pas de commentaire

Ford 2000 Excursion v.1 Manuel d'utilisateur Page 154