Ford 2000 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 159)

BRAKE FLUID

Checking and adding brake fluid

Brake fluid should be checked and

refilled as needed. Refer to the

Scheduled Maintenance Guide for

the service interval schedules.

1. Clean the reservoir cap before

removal to prevent dirt or water

from entering the reservoir.

2. Visually inspect the fluid level.

3. If necessary, add brake fluid from

a clean un-opened container until

the level reaches MAX. Do not fill

above this line.

4. Use only brake fluids certified to

meet Ford specifications. Refer to Lubricant specifications in the

Capacities and specifications chapter. DOT 3 fluid is recommended.

However, if DOT 3 is not available, DOT 4 fluid can be used.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes

with running water for 15 minutes. Seek medical attention if

irritation persists. If taken internally, drink water and induce vomiting.

Seek medical attention immediately.

If you use DOT 5 or any other brake fluid that is not DOT 3 or

DOT 4, you will cause permanent damage to your brakes.

Do not let the reservoir for the master cylinder run dry, this may

cause the brakes to fail.

MAX

Maintenance and care

159

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 223 224

Pas de commentaire

Ford 2000 Crown Victoria Manuel d'utilisateur Page 159