Ford 2000 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 192)

Replacing license plate lamp bulbs

1. Remove two screws, grommets

and the license plate lamp assembly

from the trunk lid.

2. Carefully pull the bulb from the

socket and push in the new bulb.

3. Install the lamp assembly on

trunk lid with two grommets,

ensuring the grommets are pushed

all the way in to the trunk lid and

secure with two screws.

Replacing backup lamp bulbs

1. Open trunk and remove bulb

socket from the trunk lid by turning

counterclockwise.

2. Pull the bulb straight out of the

socket and push in the new bulb.

3. Install the bulb socket in trunk lid

by turning clockwise.

Replacing high-mount brakelamp bulbs

For bulb replacement, see a dealer or qualified technician.

Replacing the interior bulbs

Check the operation of the following interior bulbs frequently:

• interior overhead lamp

• map lamp

For bulb replacement, see a dealer or qualified technician.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs must

be marked with an authorized “D.O.T.” for North America and an “E” for

Europe to assure lamp performance, light brightness and pattern and safe

visibility. The correct bulbs will not damage the lamp assembly or void the

lamp assembly warranty and will provide quality bulb burn time.

Maintenance and care

192

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 223 224

Pas de commentaire

Ford 2000 Crown Victoria Manuel d'utilisateur Page 192