Ford 2007 Freestar v.2 Manuel d'utilisateur télécharger pdf (Page 278)

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should be checked at the

intervals listed in scheduled maintenance information. The coolant

concentration should be maintained at 50/50 coolant and distilled water,

which equates to a freeze point of -34°F (-36°C). Coolant concentration

testing is possible with a hydrometer or antifreeze tester (such as the

Rotunda Battery and Antifreeze Tester, 014–R1060). The level of coolant

should be maintained at the “FULL COLD” level or within the “COLD

FILL RANGE” in the coolant reservoir. If the level falls below, add

coolant per the instructions in the Adding engine coolant section.

Your vehicle was factory-filled with a 50/50 engine coolant and water

concentration. If the concentration of coolant falls below 40% or above

60%, the engine parts could become damaged or not work properly. A

50–50 mixture of coolant and water provides the following:

• Freeze protection down to -34°F (-36°C).

• Boiling protection up to 265°F (129°C).

• Protection against rust and other forms of corrosion.

• Enables calibrated gauges to work properly.

2007 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

278

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 319 320

Pas de commentaire

Ford 2007 Freestar v.2 Manuel d'utilisateur Page 278