Ford 2007 Freestar v.2 Manuel d'utilisateur télécharger pdf (Page 145)

• Grasp the shoulder portion and

pull downward until the entire

belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the safety belt is now in the automatic locking

mode.

How to disengage the automatic locking mode

Ford Motor Company recommends that all passenger safety belt

assemblies and attaching hardware should be inspected by an

authorized dealer after any collision to verify that the ⬙automatic

locking retractor⬙ feature for child seats is still working properly. Safety

belt assemblies should be inspected by an authorized dealer and must

be replaced if either damage or improper operation is noted. Failure to

replace the belt and retractor assembly could increase the risk of

injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

Safety belt height adjustment

Your vehicle has safety belt height

adjustments at the front and second

row outboard seating positions.

Adjust the height of the shoulder

belt so the belt rests across the

middle of your shoulder.

To adjust the shoulder belt height,

squeeze and hold the buttons on the

side and slide the height adjuster up

or down. Release the buttons and

pull down on the height adjuster to make sure it is locked in place.

2007 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

145

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 319 320

Pas de commentaire

Ford 2007 Freestar v.2 Manuel d'utilisateur Page 145