Ford 2007 Freestar v.2 Manuel d'utilisateur télécharger pdf (Page 104)

Replacing lost remote entry transmitters

If you would like to have your remote entry transmitter reprogrammed

because you lost one, or would like to buy additional remote entry

transmitters, you can either reprogram them yourself, or take all

remote entry transmitters to your authorized dealer for

reprogramming.

How to reprogram your remote entry transmitters

You must have all remote entry transmitters (maximum of six)

available before beginning this procedure.

Note: Ensure the brake pedal is not

depressed during this sequence.

To reprogram the remote entry

transmitters:

1. Ensure the vehicle is electronically unlocked.

2. Put the key in the ignition.

3. Turn the key from the 3 (OFF) position to 4 (ON).

4. Cycle eight times rapidly (within 10 seconds) between the 3 (OFF)

position and 4 (ON). Note: The eighth turn must end in the 4 (ON)

position.

5. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

6. Within 20 seconds press any button on the remote entry transmitter.

Note: If more than 20 seconds have passed you will need to start the

procedure over again.

7. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

8. Repeat Step 6 to program each additional remote entry transmitter.

9. Turn the ignition to the 3 (OFF) position after you have finished

programming all of the remote entry transmitters.

10. The doors will lock, then unlock, to confirm that the programming

mode has been exited.

2007 Freestar (win)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

104

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 319 320

Pas de commentaire

Ford 2007 Freestar v.2 Manuel d'utilisateur Page 104