Ford 2004 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 38)

HEADLAMP AIM ADJUSTMENT

The headlamps on your vehicle can only be vertically adjusted. Your

vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park your vehicle on a level

surface about 7.6 meters (25 feet)

away from a vertical plain surface

(3). Check your headlamp alignment

at night or in a dark area so that

you can see the headlamp beam

pattern.

• (1) Eight feet

• (2) Center height of lamp to

ground

• (3) Twenty-five feet

• (4) Horizontal reference line

• (5) Center of headlamps

• (6) Center line of the vehicle

2. The center of the headlamp is marked either on the lens (a circle or

cross marker) or on the bulb shield, internal to the lamp (mark or

feature). Measure the height from the center of your headlamp to the

ground (2) and mark a 2.4 meter (8 foot) long horizontal line on the wall

or screen (1) at this height (masking tape works well).

3. Turn on the low beam headlamps

and open the hood.

4. Locate the high intensity area of

the beam pattern and place the top

edge of the intensity zone even with

the horizontal reference line (4). If

the bottom pattern is above the line,

the headlamp will need to be

adjusted.

5. In addition to the horizontal line

marked in step 2, a pair of vertical lines (5) must be marked at the

center line of the headlamps on the wall or screen.

2004 Ranger (ran)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 247 248

Pas de commentaire

Ford 2004 Ranger v.2 Manuel d'utilisateur Page 38