Ford 2004 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 129)

Using a step bumper

The optional step bumper is equipped with an integral hitch and requires

only a ball with a 19 mm (3/4 inch) shank diameter. The bumper has a

907 kg (2,000 lb.) trailer weight and 91 kg (200 lb.) tongue weight

capability.

The rated capacities (as shown in this guide) for trailer towing with the

factory bumper are only valid when the trailer hitch ball is installed

directly into the ball hole in the bumper. Addition of bracketry to either

lower the ball hitch position or extend the ball hitch rearward will

significantly increase the loads on the bumper and its attachments. This

can result in the failure of the bumper or the bumper attachments. Use

of any type of hitch extensions should be considered abuse.

Trailer tow connector

The trailer tow connector is located

under the rear bumper, on the

driver’s side of the vehicle.

Refer to the following chart for information regarding the

factory-equipped trailer tow connector:

Trailer tow connector

Color Function Comment

1. Dark Green Trailer right-hand

turn signal

Circuit activated when brake

pedal is depressed or when

ignition is on and right-hand

turn signal is applied.

2. Yellow Trailer left-hand turn

signal

Circuit activated when brake

pedal is depressed or when

ignition is on and left-hand

turn signal is applied.

2004 Ranger (ran)

Owners Guide (post-2002-fmt)

USA English (fus)

Driving

129

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 247 248

Pas de commentaire

Ford 2004 Ranger v.2 Manuel d'utilisateur Page 129