Ford 2003 Windstar v.2 Manuel d'utilisateur télécharger pdf (Page 142)

• Move the gearshift lever into the desired gear

To put your vehicle in P (Park):

• Come to a complete stop

• Move the gearshift lever and securely latch it in P (Park)

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.

Always come to a complete stop before shifting into and out of R

(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is

free to roll. Hold the brake pedal down while in this position.

(Overdrive)

The normal driving position for the best fuel economy. The transaxle

operates in gears one through four.

2 (Second)

This position allows for second gear only.

• Provides engine braking.

• Use to start-up on slippery roads.

• To return to

(Overdrive), move the gearshift lever into the

(Overdrive) position.

• Selecting 2 (Second) at higher speeds will cause the transaxle to

downshift to second gear at the appropriate vehicle speed.

1 (First)

• Provides maximum engine braking.

• Allows upshifts by moving gearshift lever.

• Will not downshift into 1 (First) at high speeds; allows for 1 (First)

when vehicle reaches slower speeds.

Driving

142

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 239 240

Pas de commentaire

Ford 2003 Windstar v.2 Manuel d'utilisateur Page 142