Ford 2003 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 107)

Checking the wiper blades

If the wiper blades do not wipe properly, clean both the windshield and

wiper blades using undiluted windshield wiper solution or a mild

detergent. Rinse thoroughly with clean water. To avoid damaging the

blades, do not use fuel, kerosene, paint thinner or other solvents.

Changing the wiper blades

It is recommended that wiper blades are renewed before winter.

To replace the wiper blades:

1. Fold back the wiper arm and

position the wiper blade at right

angles to the wiper arm.

2. To remove, press the retaining

clip (A) to disengage the wiper

blade, then pull the blade down

toward the windshield to remove it

from the arm.

3. Install the new wiper blade on the

arm and press it into place until a click is heard.

Changing rear window wiper blade

The rear wiper arm is designed without a service position. This reduces

the risk of damage to the blade in an automatic car wash.

To replace the wiper blade:

1. Lift and hold the wiper blade off

the glass.

2. Press the release tab to unlock

wiper blade from wiper arm.

3. Pull the wiper blade toward the

base of the wiper arm and remove it

from the arm.

4. Attach the new wiper to the

wiper arm and press it into place

until a click is heard.

Driver Controls

107

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 343 344

Pas de commentaire

Ford 2003 Expedition v.2 Manuel d'utilisateur Page 107