Ford 2003 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 101)

100

101

7. Once the bulb covers are

removed, the bulbs can be removed

by turning them counterclockwise

and then pulling the bulbs straight

out.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

8. Insert the glass end of the new bulb into the headlamp assembly.

When the grooves in the plastic base are aligned, turn the new bulb

clockwise to install.

9. Reinstall the bulb covers.

10. Replace the headlamp assembly and tighten all three retainer bolts to

secure.

Replacing front parking lamp/turn/sidemarker signal bulbs

1. Make sure that the headlamp control is in the OFF position.

2. Open the hood.

3. Remove the two headlamp

assembly retainer bolts and lamp

assembly from the vehicle.

4. Loosen the vertical bolt on the

backside of the headlamp assembly.

Do not remove it.

Lights

101

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 343 344

Commentaires sur ces manuels

Pas de commentaire

Ford 2003 Expedition v.2 Manuel d'utilisateur Page 101

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2003 Expedition v.2