Ford F-250 Manuel d'utilisateur télécharger pdf (Page 201)

Replacing the tires

Replace the tires when the wear

band is visible through the tire

treads.

When replacing full size tires, never mix radial bias-belted, or

bias-type tires. Use only the tire sizes that are listed on the

Certification Label. Make sure that all tires are the same size, speed

rating, and load-carrying capacity. Use only the tire combinations

recommended on the label. If you do not follow these precautions,

your vehicle may not drive properly and safely.

Make sure that all replacement tires are of the same size, type,

load-carrying capacity and tread design (e.g., “All Terrain”, etc.),

as originally offered by Ford.

Do not replace your tires with “high performance” tires or larger

size tires.

Failure to follow these precautions may adversely affect the

handling of the vehicle and make it easier for the driver to lose

control and roll over.

Tires that are larger or smaller than your vehicle’s original tires may also

affect the accuracy of your speedometer.

SNOW TIRES AND CHAINS

Snow tires must be the same size and grade as the tires you

currently have on your vehicle.

Maintenance and care

201

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 255 256

Pas de commentaire

Ford F-250 Manuel d'utilisateur Page 201