Ford F-250 Manuel d'utilisateur télécharger pdf (Page 216)

Replacing roof marker bulbs

To change the cab marker bulbs:

1. Remove the screw and lens from

the lamp assembly.

2. Carefully pull the bulb straight

out of the socket and push in the

new bulb.

3. Install lens on lamp assembly with

screw.

Replacing license plate lamp bulbs

The license plate bulbs are located

behind the rear bumper. To change

the license plate lamp bulbs:

1. Reach behind the rear bumper to

locate the bulb.

2. Twist the bulb socket

counterclockwise and carefully pull

to remove it from the lamp

assembly.

3. Pull out the old bulb from the

socket and push in the new bulb.

4. Install the bulb socket in lamp assembly by turning it clockwise.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs

must be marked with an authorized “D.O.T.” for North America and an

“E” for Europe to assure lamp performance, light brightness and pattern

and safe visibility. The correct bulbs will not damage the lamp assembly

or void the lamp assembly warranty and will provide quality bulb burn

time.

Maintenance and care

216

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 255 256

Pas de commentaire

Ford F-250 Manuel d'utilisateur Page 216