Ford F-250 Manuel d'utilisateur télécharger pdf (Page 191)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in the Capacities and specifications

chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 mL (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement

concerns and/or possible

damage.

Checking and adding manual transmission fluid

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

Maintenance and care

191

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 255 256

Pas de commentaire

Ford F-250 Manuel d'utilisateur Page 191