Ford F-250 Manuel d'utilisateur télécharger pdf (Page 128)

Shifting from 2WD (2WD high) to 4x4 HIGH (4WD high)

Rotate the 4WD control to the 4x4

HIGH position at speeds up to 88

km/h (55 mph).

• To prevent damage, the

electronic shift 4WD system is

designed to engage 4x4 HIGH

(4WD high) when the vehicle

is moving. If the 4x4 indicator

light does not illuminate when

shifting a vehicle that is

stationary, start the vehicle

moving. Once the vehicle is moving, 4x4 HIGH (4WD high) will

engage and the 4x4 indicator will illuminate.

Do not shift into 4x4 HIGH with the rear wheels slipping.

Shifting from 4x4 HIGH (4WD high) to 2WD (2WD high)

Rotate the 4WD control to 2WD at

any forward speed. Disengagement

of the transfer case and front hubs

may be delayed due to torque bind

which is caused by driving on dry

hard surfaces or performing tight

turns while using the 4WD system.

• You do not need to operate the vehicle in R (Reverse) to disengage

your front hubs.

Shifting from 4x4 HIGH (4WD high) to 4x4 LOW (4WD low)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

3. Place the gearshift in N (Neutral) (automatic transmission) or depress

the clutch (manual transmission).

4X4

HIGH

2WD

4X4

LOW

4X4

HIGH

2WD

4X4

LOW

Driving

128

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 255 256

Pas de commentaire

Ford F-250 Manuel d'utilisateur Page 128