Ford 2014 Fusion v.2 Manuel d'utilisateur télécharger pdf (Page 218)

4

1

3

2

E142665

1. Remove the jumper cable from the

ground metal surface or connecting

point, if available.

2. Remove the jumper cable on the

negative (-) terminal of the booster

vehicle's battery.

3. Remove the jumper cable from the

positive (+) terminal of the booster

vehicle's battery.

4. Remove the jumper cable from the

positive (+) terminal of the disabled

vehicle's battery.

After the disabled vehicle has been started

and the jumper cables removed, allow it

to idle for several minutes so the battery

can recharge.

POST-CRASH ALERT SYSTEM

The system flashes the turn signal lamps

and sounds the horn (intermittently) in the

event of a serious impact that deploys an

airbag (front, side, side curtain or Safety

Canopy) or the safety belt pretensioners.

The horn and lamps will turn off when:

• The hazard control button is pressed

• The panic button (if equipped) is

pressed on the remote entry

transmitter

• Your vehicle runs out of power

Spinout Detection

If a spinout is detected, the vehicle comes

to a stop and the hazard warning flashers

come on. The message Spinout Detected

Hazards Activated will also appear on

the instrument cluster. The message may

not appear if your vehicle runs out of

power.

Once the hazard warning flashers have

been activated, you can turn them off by:

• Pressing the hazard warning flasher

button

• Pressing the remote control unlock

button

• Pressing the remote control panic

button

• Cycling the ignition on and off twice

216

Fusion (CC7)

Roadside Emergencies

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 452 453

Commentaires sur ces manuels

Pas de commentaire