Ford 2014 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 130)

HomeLink Wireless Control

System

(If Equipped)

WARNING

Do not use the system with any

garage door opener that does not

have the safety stop and reverse

feature as required by U.S. Federal Safety

Standards (this includes any garage door

opener manufactured before April 1, 1982).

A garage door opener which cannot detect

an object, signaling the door to stop and

reverse, does not meet current federal

safety standards. Using a garage door

opener without these features increases

the risk of serious injury or death.

Note: Make sure that the garage door and

security device are free from obstruction

when you are programming. Do not program

the system with the vehicle in the garage.

Note: Make sure you keep the original

remote control transmitter for use in other

vehicles as well as for future system

programming.

Note: We recommend that upon the sale

or lease termination of your vehicle, you

erase the programmed function buttons for

security reasons. See Erasing the function

button codes later in this section.

Note: You can program a maximum of

three devices. To change or replace any of

the three devices after it has been initially

programmed, you must first erase the

current settings. See Erasing the function

button codes later in this section.

E142657

The universal garage door opener replaces

the common hand-held garage door

opener with a three-button transmitter

that is integrated into the driver’s sun visor.

The system includes two primary features,

a garage door opener and a platform for

remote activation of devices within the

home. As well as being programmed for

garage doors, the system transmitter can

be programmed to operate entry gate

operators, security systems, entry door

locks and home or office lighting.

Additional system information can be

found online at www.homelink.com or by

calling the toll-free help line on

1-800-355-3515.

In-vehicle programming

This process is to program your hand-held

transmitter and your in-vehicle HomeLink

button.

Note: Put a new battery in the hand-held

transmitter. This will ensure quicker training

and accurate transmission of the

radio-frequency signal.

E142658

1. With your vehicle parked outside of the

garage, turn your ignition to the on

position, but do not start your vehicle.

2. Hold your hand-held garage door

transmitter 1–3 inches (2–8

centimeters) away from the HomeLink

button you want to program.

127

Universal Garage Door Opener

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 456 457

Commentaires sur ces manuels

Pas de commentaire