Ford 2014 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 54)

CREATING A MYKEY

Use the information display to create a

MyKey:

1. Insert the key you want to program into

the ignition. If your vehicle is equipped with

a push-button start, place the intelligent

access key fob into the backup slot. The

location of your backup slot is in another

chapter. See Starting and Stopping the

Engine (page 134).

2. Switch the ignition on.

3. Access the main menu on the

information display controls, and select

Settings then MyKey by pressing OK or

the > button.

4. Press OK or the > button to select

Create MyKey.

5. When prompted, hold the OK button

until you see a message informing you to

label this key as a MyKey. The key will be

restricted at the next start.

MyKey is successfully created. Make sure

you label it so you can distinguish it from

the admin keys.

You can also program configurable

settings for the key(s). See

Programming/Changing Configurable

Settings.

Programming/Changing

Configurable Settings

Use the information display to access your

configurable MyKey settings.

1. Switch the ignition on using an admin

key or fob.

2. Access the main menu on the

information display controls, and select

Settings, then MyKey by pressing OK

or > button.

3. Use the arrow buttons to get to a

feature.

4. Press OK or > to make a selection.

Note: You can clear or change your MyKey

settings at any time during the same key

cycle as you created the MyKey. Once you

have switched the vehicle off, however, you

will need an admin key to change or clear

your MyKey settings.

CLEARING ALL MYKEYS

You can clear all MyKeys within the same

key cycle as you created the MyKey. If you

switch your ignition off, however, you will

need to use an admin key to clear your

MyKeys.

Note: When you clear your MyKeys, you

remove all restrictions and return all MyKeys

to their original admin key status at once.

To clear all MyKeys of all MyKey settings,

use the information display to do the

following:

1. Access the main menu and select

Settings, then MyKey.

2. Scroll to Clear MyKey and press the

OK button.

3. Hold the OK button until ALL

MYKEYS CLEARED displays.

CHECKING MYKEY SYSTEM

STAT U S

You can find information about your

programmed MyKeys by using the

information display.

MYKEY DISTANCE

Tracks the distance when drivers use a

MyKey. The only way to delete the

accumulated distance is by using an admin

key to clear your MyKey. If the distance

does not accumulate as expected, then

the intended user is not using the MyKey,

or an admin key user recently cleared and

then recreated a MyKey.

51

MyKey™

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 456 457

Commentaires sur ces manuels

Pas de commentaire