Ford 2014 Focus Electric Manuel d'utilisateur Page 188

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 403
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 187
Removing the Jumper Cables
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from
the ground metal surface.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle’s battery.
3. Remove the jumper cable from
the positive (+) terminal of the
booster vehicle’s battery.
4. Remove the jumper cable from
the positive (+) terminal of the
disabled vehicle’s battery.
After the disabled vehicle has been started and the jumper cables
removed, allow it to dwell in Ready to Drive mode for several minutes so
the high-voltage battery can continue to recharge the 12–volt battery.
COLLISION, DAMAGE OR FIRE EVENT
Guidance for Ford Motor Company Electric and Hybrid-Electric
Vehicles Equipped With High-Voltage Batteries (Vehicle
Owner/Operator/General Public)
In the event of damage or fire involving an electric vehicle (EV) or
hybrid-electric vehicle (HEV):
Always assume the high-voltage battery and associated components
are energized and fully charged.
Exposed electrical components, wires, and high-voltage batteries
present potential high-voltage shock hazards.
4
1
3
2
Roadside Emergencies 187
2014 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing, May 2013
USA (fus)
Vue de la page 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 402 403

Commentaires sur ces manuels

Pas de commentaire