Ford 2014 Focus Electric Manuel d'utilisateur télécharger pdf (Page 261)

100

101

8. Inflate the tire to the pressure

listed on the tire label located on

the driver’s door or the door jamb

area.

Note: When the sealing compound is first added into the tire, the air

pressure gauge reading on the compressor unit may indicate a higher

value; this is normal and should be no reason for concern. The pressure

will drop after about 30 seconds of operation. The tire pressure has to be

checked with the compressor in the OFF position to get the correct tire

pressure reading.

9. When the recommended tire pressure is reached, turn off the kit by

pressing the on/off button; disconnect the kit from the tire valve and the

power point. Re-install the valve cap on the tire valve, place the tube cap

on the metal connector, and return the kit to the stowage area.

10. Note: Immediately and cautiously, drive the vehicle 4 miles

(6 kilometers) to distribute the sealant evenly inside the tire. Do not

exceed 50 mph (80 km/h).

Note: If you experience any unusual vibration, ride disturbance or

noise while driving, reduce your speed until you can safely pull off to

the side of the road to call for roadside assistance. Note: Do not

proceed to the second stage of this operation.

11. After 4 miles (6 kilometers), stop and check the tire pressure.

See Second stage: Checking tire pressure.

260 Wheels and Tires

2014 Focus Electric Vehicle (fob)

Owners Guide gf, 1st Printing, May 2013

USA (fus)

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 402 403

Commentaires sur ces manuels

Pas de commentaire

Ford 2014 Focus Electric Manuel d'utilisateur Page 261

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2014 Focus Electric