Ford 2014 F-150 Raptor v.3 Manuel d'utilisateur télécharger pdf (Page 267)

CLEANING THE ALLOY

WHEELS (IF EQUIPPED)

Note: Do not apply a cleaning chemical to

warm or hot wheel rims and covers.

Note: Some automatic car washes may

cause damage to the finish on your wheel

rims and covers.

Note: Industrial-strength or heavy-duty

cleaners in combination with brush agitation

to remove brake dust and dirt, could wear

away the clear coat finish over a period time.

Note: Do not use hydrofluoric acid-based

or high caustic-based wheel cleaners, steel

wool, fuels or strong household detergents.

Note: If you intend parking your vehicle for

an extended period after cleaning the

wheels with a wheel cleaner, drive your

vehicle for a few minutes before doing so.

This will reduce the risk of increased

corrosion of the brake discs.

Alloy wheels and wheel covers are coated

with a clear coat paint finish. To maintain

their condition we recommend that you:

• Clean the wheels weekly using

Motorcraft Wheel and Tire Cleaner.

Apply using manufacturer's

instructions.

• Use a sponge to remove heavy

deposits of dirt and brake dust

accumulation.

• Rinse thoroughly with a strong stream

of water when you have completed the

cleaning process.

• To remove tar and grease, use

Motorcraft Bug and Tar Remover.

VEHICLE STORAGE

If you plan on storing your vehicle for an

extended period of time (30 days or more),

read the following maintenance

recommendations to make sure your

vehicle stays in good operating condition.

All motor vehicles and their components

were engineered and tested for reliable,

regular driving. Long term storage under

various conditions may lead to component

degradation or failure unless specific

precautions are taken to preserve the

components.

General

• Store all vehicles in a dry, ventilated

place.

• Protect from sunlight, if possible.

• If vehicles are stored outside, they

require regular maintenance to protect

against rust and damage.

Body

• Wash your vehicle thoroughly to

remove dirt, grease, oil, tar or mud from

exterior surfaces, rear-wheel housing

and underside of front fenders.

• Periodically wash your vehicle stored

in exposed locations.

• Touch-up exposed or primed metal to

prevent rust.

• Cover chrome and stainless steel parts

with a thick coat of auto wax to prevent

discoloration. Re-wax as necessary

when your vehicle is washed.

• Lubricate all hood, door and trunk lid

hinges, and latches with a light grade

oil.

• Cover interior trim to prevent fading.

• Keep all rubber parts free from oil and

solvents.

264

F150 (TF6) , enUSA

Vehicle Care

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 471 472

Commentaires sur ces manuels

Pas de commentaire