Ford 2013 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 142)

100

101

Rolling code programming

Note: If you do not follow the time-sensitive instructions, the device will

time out and you will have to repeat the complete procedure.

Note: It may be helpful to have another person assist you in

programming the transmitter.

1. Switch the ignition on.

2. Press and hold the outer two

buttons for 1–2 seconds, then

release.

Note: You may need a ladder to

reach the unit and you may need to

remove the cover or lamp lens.

Note: If you cannot locate the learn

button, refer to the Owner Manual

of your garage door opener or call

the toll-free help line on

1-866-572-2728.

3. Press the learn button on the

garage door opener motor.

Note: You will have 10–30 seconds

to complete the following steps.

4. Return to your car.

5. Press and hold the function

button you would like to use to

control the garage door. You may

need to hold the button from

5–20 seconds, during which time the selected button LED lamp will flash

slowly.

6. When the garage door moves, release the button within one second.

The LED lamp will flash rapidly until programming is complete.

7. Press and release the button again. The garage door should move,

confirming that programming is successful. If your garage door does not

operate, repeat the previous steps.

The LED lamp above the selected button will illuminate to confirm that

the system is responding to the button command.

To program another rolling code device, repeat steps one through six

substituting a different function button in step four.

142 Universal Garage Door Opener

2013 05+ Mustang (197)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 426 427

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Mustang v.2 Manuel d'utilisateur Page 142

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Mustang v.2