Ford 2013 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 143)

100

101

Fixed code programming

Note: It may be helpful to have another person assist you in

programming the transmitter.

To program units with fixed code

DIP switches, you will need the

garage door hand-held transmitter,

paper and a pen or pencil.

1. Switch the ignition on.

2. Open the battery cover and note

all the switch settings from left to right.

When the switch is in the up, on, or + position, mark down “left button”.

When the switch is in the middle, neutral, or 0 position, mark down

“middle button”.

When the switch is in the down, off, or – position, mark down “right

button”.

3. Press all three function buttons

simultaneously for a few seconds

and then release. The LED lamps

will flash slowly.

Note: The following step must be

completed within 2.5 minutes.

4. Enter the corresponding DIP switch settings from left to right into the

system by pressing and releasing the buttons corresponding to the

settings you noted.

5. Simultaneously press and release all three function buttons. The LED

lamps will illuminate.

6. Press and hold the function

button you would like to use to

control the garage door.

Note: You may need to hold the

button from 5–55 seconds before

observing movement of the garage

door.

7. When the garage door moves, release the button within one second.

When the button is released, the LED lamp will flash slowly.

8. The LED lamp will begin to flash rapidly until programming is

complete. If your garage door does not operate, repeat the previous

steps. Otherwise, call the toll-free help line on 1-866-572-2728.

Universal Garage Door Opener 143

2013 05+ Mustang (197)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 426 427

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Mustang v.2 Manuel d'utilisateur Page 143

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Mustang v.2