Ford 2013 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 280)

100

101

6. The vehicle jacking points are

shown here, and can be identified

by the triangle markings on the

vehicle. Details are depicted on the

yellow warning label on the jack.

Jack at the specified locations to avoid damage to the vehicle.

7. Put the jack in the jack notch

next to the tire you are changing.

Turn the jack handle clockwise until

the wheel is completely off the

ground.

8. Remove the lug nuts with the lug

wrench.

9. Replace the flat tire with the

spare tire, making sure the valve

stem is facing outward. Reinstall lug

nuts until the wheel is snug against the hub. Do not fully tighten the lug

nuts until the wheel has been lowered.

If you are using the temporary tire, the lug nut washers will not appear

to be flush with the rim. This is normal only when using the temporary

spare tire.

10. Lower the wheel by turning the jack handle counterclockwise.

11. Remove the jack and fully tighten the

lug nuts in the order shown. Refer to Wheel

lug nut torque specifications later in this

chapter for the proper lug nut torque

specification.

12. Put flat tire, wheel ornament (if

equipped), jack and lug wrench away. Make

sure the jack is fastened so it does not rattle

when you drive.

13. Unblock the wheel.

280 Wheels and Tires

2013 05+ Mustang (197)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 426 427

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Mustang v.2 Manuel d'utilisateur Page 280

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Mustang v.2