Ford 2013 Mustang v.1 Manuel d'utilisateur télécharger pdf (Page 243)

100

101

4. Locate the vertical adjuster on

each headlamp.

5. Then usea7mmAllenwrench or a Phillips screwdriver to adjust the

headlamp up or down. HORIZONTAL AIM IS NOT REQUIRED FOR THIS

VEHICLE AND IS NON-ADJUSTABLE.

6. Close the hood and turn off the lamps.

CHANGING A BULB

Lamp assembly condensation

Exterior lamps are vented to accommodate normal changes in pressure.

Condensation can be a natural by-product of this design. When moist air

enters the lamp assembly through the vents, there is a possibility that

condensation can occur when the temperature is cold. When normal

condensation occurs, a thin film of mist can form on the interior of the

lens. The thin mist eventually clears and exits through the vents during

normal operation. Clearing time may take as long as 48 hours under dry

weather conditions.

Examples of acceptable condensation are:

• Presence of thin mist (no streaks, drip marks or droplets)

• Fine mist covers less than 50% of the lens

Examples of unacceptable moisture (usually caused by a lamp water

leak) are:

• Water puddle inside the lamp

• Large water droplets, drip marks or streaks present on the interior of

the lens

Take your vehicle to a dealer for service if any of the above conditions of

unacceptable moisture are present.

Maintenance 243

2013 05+ Mustang (197)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 436 437

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Mustang v.1 Manuel d'utilisateur Page 243

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Mustang v.1