Ford 2013 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 254)

5. Locate the vertical adjuster on each

headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise or counterclockwise in order

to adjust the vertical aim of the

headlamp. The horizontal edge of the

brighter light should touch the

horizontal reference line.

6. Close the hood and turn off the lamps.

Horizontal Aim Adjustment

Horizontal aim is not required for this

vehicle and is not adjustable.

REMOVING A HEADLAMP

See an authorized dealer.

CHANGING A BULB

Lamp Assembly Condensation

Exterior lamps are vented to

accommodate normal changes in pressure.

Condensation can be a natural by-product

of this design. When moist air enters the

lamp assembly through the vents, there is

a possibility that condensation can occur

when the temperature is cold. When

normal condensation occurs, a thin film of

mist can form on the interior of the lens.

The thin mist eventually clears and exits

through the vents during normal operation.

Clearing time may take as long as 48 hours

under dry weather conditions.

Examples of acceptable condensation are:

• Presence of thin mist (no streaks, drip

marks or droplets).

• Fine mist covers less than 50% of the

lens.

Examples of unacceptable moisture

(usually caused by a lamp water leak) are:

• Water puddle inside the lamp.

• Large water droplets, drip marks or

streaks present on the interior of the

lens.

Take your vehicle to a dealer for service if

any of the above conditions of

unacceptable moisture are present.

Replacing the Headlamp Bulbs

For any front bulb replacement, see your

authorized dealer.

Replacing the Tail, Brake, High-

Mount Brake Lamp, and Turn

Signal Lamp Bulbs

These lamps are designed with LED light

sources. For replacement, see your

authorized dealer.

Replacing a Reverse Lamp Bulb

1. Make sure the lighting control is in the

off position.

2. Open the trunk deck lid.

E145777

3. Remove the push pins and reposition

the inner body side trim.

252

Maintenance

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 448 449

Commentaires sur ces manuels

Pas de commentaire