Ford 2013 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 52)

5. When prompted, hold the OK button

until you see a message informing you

to label this key as a MyKey. The key

will be restricted at the next start.

The key is successfully programmed. Make

sure you label it so you can distinguish it

from the admin keys.

You can program optional settings for the

key(s). Refer to Programming/Changing

optional settings.

Programming/Changing Optional

Settings

All programmed keys can be cleared within

the same key cycle in which a key was

programmed, otherwise an admin key is

required to clear the keys. See Clearing

All MyKeys (page 50).

You can access the optional settings

through the information display control.

1. Turn the ignition on using an admin key.

2. Access the main menu and select

Settings, then MyKey.

3. Use the arrow buttons to get to an

optional feature.

4. Press OK or > to scroll through settings.

5. Press OK or > to make a selection.

CLEARING ALL MYKEYS

All programmed MyKeys can be cleared

within the same key cycle in which a MyKey

was created, otherwise an admin key is

required to clear the keys.

To clear all MyKeys (which removes all

restrictions and returns them to admin key

status), use the information display control

to do the following:

1. Access the main menu and select

Settings, then MyKey.

2. Scroll to Clear All and press the OK

button.

3. Hold the OK button until ALL MYKEYS

CLEARED is displayed.

CHECKING MYKEY SYSTEM

STATUS

The information display control displays

information about keys programmed to

the vehicle:

• MYKEY MILES: Tracks mileage when

a restricted key is used. If mileage does

not accumulate as expected, then the

key is not being used by the intended

user. The only way to reset this to zero

is by clearing MyKeys. If the mileage is

lower than the last time you checked,

then the key system has been recently

reset.

• #MYKEY(S): Indicates how many

restricted keys are programmed to the

vehicle. Can also be used to detect

deletion of a restricted key.

• #ADMIN KEY(S): Indicates how

many admin keys are programmed to

the vehicle. Can also be used to detect

if an additional key has been

programmed to the vehicle.

USING MYKEY WITH REMOTE

START SYSTEMS

MyKey is NOT compatible with

non-Ford-approved aftermarket remote

start systems. If you choose to install a

remote start system please see your Ford

authorized dealer for a Ford-approved

remote start system.

50

MyKey®

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 448 449

Commentaires sur ces manuels

Pas de commentaire