Ford 2013 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 50)

E138626

The tag with your transmitter details the

starting procedure. To remote start the

vehicle:

1. Press the lock button to lock all the

doors.

2. Press the remote start button twice.

The exterior lamps will flash twice.

The horn will chirp if the system fails to

start, unless quiet start is on. Quiet start

will run the blower fan at a slower speed

to reduce noise. It can be switched on or

off in the information display. See General

Information (page 83).

Note: If the vehicle has been remote started

and is equipped with an integrated keyhead

transmitter, you must turn the ignition on

before driving the vehicle. If equipped with

an intelligent access transmitter, you must

press the START/STOP button on the

instrument panel once while applying the

brake pedal before driving the vehicle.

The power windows will be inhibited during

the remote start and the radio will not turn

on automatically.

The parking lamps will remain on and the

engine will run for 5, 10, or 15 minutes,

depending on the setting.

Extending the Vehicle Run Time

Repeat Steps 1 and 2 with the vehicle still

running to extend the run time for another

remote start duration. If you programmed

the duration to last 10 minutes, the second

10 minutes will begin after what is left of

the first activation time. For example, if the

vehicle had been running from the first

remote start for five minutes, the vehicle

will continue to run now for a total of 15

minutes. You can only extend the remote

start once.

Wait at least five seconds before remote

starting after a vehicle shutdown. Only two

remote starts are allowed.

The ignition must be turned on and then

back off or allow one hour to pass before

using remote start again if additional

remote starts are desired.

Turning the Vehicle Off After Remote

Starting

E138625

Press the button once. The

parking lamps will turn off.

You may have to be closer to the

vehicle than when starting due to ground

reflection and the added noise of the

running vehicle.

You can disable or enable the remote start

system through the information display.

See General Information (page 83).

REPLACING A LOST KEY OR

REMOTE CONTROL

Replacement or additional keys or remote

controls can be purchased from your

authorized dealer. Your dealer can program

the transmitters to your vehicle or you may

be able to program them yourself. See

Passive Anti-Theft System (page 59).

48

Keys and Remote Controls

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 448 449

Commentaires sur ces manuels

Pas de commentaire