Ford 2013 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 196)

Note: If a MyKey® is detected, pressing the

button will not affect the on/off status of

the system. Only the Mode, Sensitivity and

Intensity settings can be changed when a

MyKey® is present.

To turn the system on, press the

button located on the left

steering wheel stalk. The button

must be pressed each time the vehicle is

started. The system can be turned off by

pressing the button again.

System Settings

The system has three optional setting

menus available. To view or adjust them,

select Settings > Vehicle Settings > Driver

Assist > Lane Keeping Sys in the left-hand

instrument cluster display using the OK

button on the steering wheel. The

last-known selection for each of these

settings is stored by the system. You do

not need to readjust your settings each

time you turn on the system.

Mode: This setting allows the driver to

select which of the system features will be

enabled and turned on when the button is

pressed.

• Alert only – Provides a steering wheel

vibration when an unintended lane

departure is detected.

• Aid only – Provides a steering input

toward the lane center when an

unintended lane departure is detected.

• Both Alert + Aid

Intensity: This setting affects the intensity

of the steering wheel vibration used for the

alert and alert + aid modes. This setting

does not impact the aid mode.

• Low

• Medium

• High

System Display

E151660

When the system is turned on, an overhead

graphic of a vehicle with lane markings will

be displayed in the left-hand instrument

cluster display. If the aid mode is selected

when the system is turned on, a separate

white icon will also appear in the

instrument cluster.

When the system is turned off, the lane

marking graphics will not be displayed.

Note: The overhead vehicle graphic may

still be displayed if adaptive cruise control

is enabled.

While the system is on, the color of the

lane markings will change to indicate the

system status.

Gray: Indicates that the system is

temporarily unable to provide a warning

or intervention on the indicated side(s).

This may be because:

• the vehicle is under the activation

speed

• the turn indicator is active

• the vehicle is in a dynamic maneuver

194

Driving Aids

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 448 449

Commentaires sur ces manuels

Pas de commentaire