Ford 2013 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 365)

100

101

Note: Passengers should not remain in the vehicle when the vehicle is

being jacked.

Park on a level surface, set the parking brake and activate hazard flashers.

2. Place gearshift lever in P (Park) and turn engine off.

If the 3rd row seat is stowed in the floor, you will need to unstow it to

access the spare tire and jack.

3. Remove the carpeted floor panel

located in the rear of the vehicle, then

remove the wing nut that secures the

spare tire by turning it counterclockwise.

4. Lift and remove the spare tire from

the trunk.

5. Remove the second wing nut that

secures the jack retention bracket by

turning it counterclockwise, remove the

jack kit from the vehicle.

6. Remove the jack, L-shaped bolt, and

the wrench from the felt bag. Fold down

the wrench socket to use to loosen the

lug nuts and to operate the jack.

7. Block the diagonally opposite

wheel.

8. Remove wheel cover (if equipped) with the lug wrench tip and loosen

each wheel lug nut one-half turn counterclockwise but do not remove

them until the wheel is raised off the ground.

Wheels and Tires 365

2013 Flex (471)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 360 361 362 363 364 365 366 367 368 369 370 ... 557 558

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Flex v.1 Manuel d'utilisateur Page 365

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Flex v.1