Ford 2013 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 323)

100

101

2. Lift the passenger’s side of the cover and push the

cover toward the passenger’s side. Release the three

tabs on the cover from the three slots in the driver’s

side of the housing.

3. Carefully separate the cover from the housing.

4. Remove the air filter element from the housing.

5. Wipe the cover and the housing clean to remove any

dirt or debris and to make sure the cover seals to the

housing.

6. Install a new air filter element. Be careful not to crimp the filter element

edges between the housing and the cover. This could cause filter damage

and allow unfiltered air to enter the engine if not properly seated.

7. Lower the driver’s side of the cover and slide the three tabs on the

cover into the three slots in the housing.

8. Lower the passenger’s side of the cover. Engage the two clamps to

secure the cover to the housing.

Maintenance 323

2013 Flex (471)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 557 558

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Flex v.1 Manuel d'utilisateur Page 323

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Flex v.1