Ford 2013 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 284)

100

101

3. Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving

parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect from any electrical

surges. Turn all other accessories off.

Connecting the Jumper Cables

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Note: Do not attach the negative (-) cable to fuel lines, engine rocker

covers, the intake manifold or electrical components as grounding points.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Connect the positive (+) jumper

cable to the positive (+) terminal of

the discharged battery.

2. Connect the other end of the

positive (+) cable to the positive

(+) terminal of the assisting battery.

3. Connect the negative (-) cable to

the negative (-) terminal of the

assisting battery.

4. Make the final connection of the

negative (-) cable to an exposed

metal part of the stalled vehicle’s

engine, away from the battery and

the carburetor/fuel injection system.

Ensure that the cables are clear of fan blades, belts, moving parts of both

engines, or any fuel delivery system parts.

284 Roadside Emergencies

2013 Flex (471)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 557 558

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Flex v.1 Manuel d'utilisateur Page 284

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Flex v.1