Ford 2012 F-250 Manuel d'utilisateur télécharger pdf (Page 304)

100

101

• Do not shift into 4H (4x4

High) with the rear wheels

slipping.

• The vehicle should not be

driven in 4X4 High with the

hub locks disengaged as this

condition may damage

driveline system components.

Shifting from 4H (4x4 High) to 2H (2WD)

Move the transfer case lever to 2H

(2WD) at a stop or a vehicle speed

below 3 mph (5 km/h).

With the vehicle at complete stop,

disengage the locking hubs

(optional) by rotating the hub lock

control from LOCK to FREE.

• For proper operation, make

sure that both indicator arrows on the hub are aligned, and

that both hubs are set to FREE.

Shifting from 2H (2WD) or 4H (4x4 High) to 4L (4x4 Low)

1. Bring the vehicle to a stop or a speed below 3 mph (5 km/h).

2. Place the transmission in N (Neutral).

3. Move the transfer case shift lever

through N (Neutral) directly to 4L

(4x4 Low).

4. If the shift lever does not, or only

partially moves to the 4L (4x4 Low)

position, perform a shift with the

transmission in N (Neutral) and the

vehicle rolling at a speed below

3 mph (5 km/h). This will ensure the transfer case is fully engaged into

4L (4x4 Low).

Note: The vehicle should not be driven in 4X4 High with the hub locks

disengaged as this condition may damage driveline system components.

Driving

304

2012 F-250/350/450/550 (f23)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 447 448

Ford 2012 F-250 Manuel d'utilisateur Page 304

Commentaires sur ces manuels