Ford 2012 F-250 Manuel d'utilisateur télécharger pdf (Page 26)

100

101

2. Press and hold the RESET button for two seconds and release to reset

the oil life to 100%.

Note: To change oil life 100% value (if equipped with this feature) to

another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

RESET button to change the oil life start value. Each release and press

will reduce the value by 10%.

UNITS

Displays the current units English or Metric.

Press the RESET button to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

Press the RESET control to select the new autolamp delay values of 0,

10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Press the RESET control to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn it off or on.

COURTESY WIPE

One extra wipe will occur a few seconds after washing the front window

to clear any excess washer fluid remaining on the windshield.

Press RESET to turn this feature on or off.

CREATE MYKEY / MYKEY SETUP/ CLEAR MYKEY

For more information refer to MyKey威 in the Locks and Security chapter.

RESET FOR ZONE SETTING

This feature changes the compass zone setting.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the vehicle

crosses multiple zones. A correct zone setting will eliminate this error.

Instrument Cluster

2012 F-250/350/450/550 (f23)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 447 448

Ford 2012 F-250 Manuel d'utilisateur Page 26

Commentaires sur ces manuels