Ford 2012 F-250 Manuel d'utilisateur télécharger pdf (Page 163)

100

101

To install a filter:

1. First, position the filter in its

housing making sure that the far

forward end is all the way up in the

housing.

2. Push in on the center of the

outside edge of the filter and rotate

up into the housing until it clips into

position.

Memory seats/power mirrors/adjustable pedals (if equipped)

This system allows automatic

positioning of the driver seat, power

mirrors, and adjustable pedals to

two programmable positions.

The memory control is located on

the driver’s door.

• To program position 1, move the

memory features to the desired

positions using the associated

controls. Press and hold button 1

for at least two seconds. A chime will sound confirming that a memory

position has been set.

• To program position 2, repeat the previous procedure using button 2.

A memory position may be programmed at any time.

To program the memory feature to a remote entry transmitter, refer to

Remote entry system in the Locks and Security chapter.

A programmed memory position can be recalled:

• in any gearshift position if the ignition is not on.

• only in P (Park) or N (Neutral) if the ignition is on.

The memory positions are also recalled when you press your remote

entry transmitter

(unlock) control (if the transmitter is programmed

to a memory position) or, when you enter a valid personal entry code

that is programmed to a memory position. The mirrors will move to the

programmed position and the seat will move to the easy entry position.

The seat will move to the final position when the key is in the ignition (if

easy entry feature is enabled).

Seating and Safety Restraints

163

2012 F-250/350/450/550 (f23)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 447 448

Ford 2012 F-250 Manuel d'utilisateur Page 163

Commentaires sur ces manuels