Ford 2011 Flex v.1 Manuel d'utilisateur télécharger pdf (Page 89)

100

101

Replacing front parking lamp/turn signal bulbs

1. Make sure headlamp switch is in the off position, then open the hood.

2. Reach behind the headlamp assembly to access the bulb sockets and

connectors.

3. Remove the bulb socket by

turning it counterclockwise and

pulling it straight out.

4. To remove the bulb, pull it

straight out of the bulb socket.

Install the new bulb(s) in reverse

order.

Replacing rear stop/tail/turn/backup and side marker lamp bulbs

(non LED)

The stop/tail/turn/backup and side marker lamp bulbs are located in the

tail lamp assembly.

Note: Your vehicle may be equipped with a stop/tail/turn and side

marker lamp assemblies containing integral multiple light emitting diodes

(LED). If replacement is required, see your authorized dealer.

• (1) Backup lamp

• (2) Stop/tail/turn signal lamp

• (3) Side marker lamp

• (4) Supplemental taillamp

1. Make sure the headlamp switch is

in the off position and open the

liftgate.

2. Remove the hex screws in the

liftgate opening, then pull the lamp

assembly away from the vehicle. This will disengage two snap

attachments along the side of the vehicle.

3. Remove the bulb socket by rotating it counterclockwise, then pulling it

out of the lamp assembly.

4. Pull the bulb straight from the socket.

Install new bulb(s) in reverse order.

Lights

2011 Flex (471)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 417 418

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Flex v.1 Manuel d'utilisateur Page 89

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Flex v.1