Ford 2009 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 129)

3. Once “OIL LIFE SET TO 100%” is

displayed, release, press and hold

the SELECT/RESET control switch

for more than two seconds to

change the Oil Life Start Value.

Each release, press and hold will

reduce the value by 10%.

4. After setting the Oil Life Start Value, press and release the

SELECT/RESET control switch for the next SETUP MENU item or wait

for more than four seconds to return to the INFO MENU.

Note: Oil Life Start Value of 100% equals 7,500 miles (12,000 km) or six

months. For example, setting Oil Life Start Value to 60% sets the Oil Life

Start Value to 3,000 miles (4,800 km) and 120 days.

Compass display (if equipped)

The compass heading is displayed as one of N, NE, E, SE, S, SW, W and

NW in the message center display.

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is up

to four degrees between adjacent zones and will become noticeable as

the vehicle crosses multiple zones. A correct zone setting will eliminate

this error. Refer to Compass calibration adjustment.

2009 Explorer (exp)

Owners Guide, 1st Printing

USA (fus)

Driver Controls

129

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 406 407

Pas de commentaire

Ford 2009 Explorer v.1 Manuel d'utilisateur Page 129