Ford 2009 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 104)

100

101

5. Rotate the bulb socket

counterclockwise and remove from

the lamp assembly.

6. Carefully pull the bulb out of the

socket and push in the new bulb.

7. Install the bulb socket into the

lamp assembly and rotate clockwise.

8. Install the headlamp assembly

and secure with two retainer bolts.

Replacing tail/stop/turn/sidemarker/backup lamp bulbs

The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same

portion of the tail lamp assembly, one just below the other. Follow the

same steps to replace either bulb:

1. Make sure the headlamp switch is

in the off position and then open

the liftgate to expose the lamp

assembly screws.

2. Remove the two torx screws from

the lamp assembly.

3. Carefully remove the lamp

assembly away from the vehicle by

pulling the assembly straight out to

expose the bulb socket. DO NOT

TIP THE LAMP ASSEMBLY SIDEWAYS.

4. Rotate the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull bulb straight out of socket and snap in the new bulb.

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle by securing the

lamp assembly with two torx screws.

2009 Expedition (exd)

Owners Guide, 1st Printing

USA (fus)

Lights

104

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 415 416

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 Expedition v.1 Manuel d'utilisateur Page 104

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 Expedition v.1