Ford 2009 Edge v.2 Manuel d'utilisateur télécharger pdf (Page 288)

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

until it stops.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). An oil with this trademark symbol conforms

to the current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft SAE 5W-20

or an equivalent SAE 5W-20 oil meeting Ford specification

WSS-M2C930-A. SAE 5W-20 oil provides optimum fuel economy and

durability performance meeting all requirements for your

vehicle’s engine. Refer to Maintenance product specifications and

capacities later in this chapter for more information.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Change your engine oil and filter according to the appropriate schedule

listed in the scheduled maintenance information.

Ford production and Motorcraft replacement oil filters are designed for

added engine protection and long life. If a replacement oil filter is used

2009 Edge (edg)

Owners Guide, 2nd Printing

USA (fus)

Maintenance and Specifications

288

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 325 326

Pas de commentaire

Ford 2009 Edge v.2 Manuel d'utilisateur Page 288